3D print enthusiast

Bambu Labs P1P vs Creality K1 Hype for 3D print enthusiast

Bambu Labs P1P

 

A Comprehensive Review

The Bambu Labs P1P is one of the best 3D printers on the market in 2023. It offers a large build volume, fast print speeds, and a direct drive extruder, making it ideal for printing a wide range of materials and objects.

 

Introduction

3D printing has become increasingly popular in recent years, as it has become more affordable and accessible. The Bambu Labs P1P is a great example of a high-quality 3D printer that is suitable for both beginners and experienced users alike.

In this comprehensive review, we will take a look at all of the features of the Bambu Labs P1P, as well as its pros and cons. We will also compare it to the Creality K1, another popular 3D printer in the same price range.

 

Bambu Labs P1P Features

 

Build Volume

The Bambu Labs P1P has a build volume of 256 x 256 x 256 mm, which is larger than most other 3D printers in its price range. This means that it can print larger items like our photo lithophanes without any problems.

 

Print Speed

The Bambu Labs P1P has a maximum print speed of 500 mm/s, which is very fast for a 3D printer. This means that you can print objects much faster than with other 3D printers.

 

Direct Drive Extruder

The Bambu Labs P1P uses a direct drive extruder, which is better suited for printing lithophanes and other detailed objects than a bowden extruder. It is also better for printing materials that require a lot of retraction, such as ABS and ASA.

 

Other Features

The Bambu Labs P1P comes with a number of other features, such as:

  • Auto bed leveling: This feature automatically levels the print bed before each print, which ensures that your prints will always stick to the bed properly.
  • Wi-Fi connectivity: This feature allows you to control the printer and monitor your prints remotely using a Wi-Fi enabled device.
  • Built-in camera: This feature allows you to view the print bed and your prints remotely using a Wi-Fi enabled device.
  • Filament sensor: This feature detects when the filament runs out and pauses the print so that you can refill the filament.
  • Power loss recovery system: This feature resumes the print from where it left off in the event of a power outage.
  • Touchscreen interface: This feature makes it easy to control the printer and monitor your prints.

Performance

The Bambu Labs P1P is a very well-performing 3D printer. It is able to produce high-quality prints with a variety of materials. The printer is also very fast, and it can print objects much faster than most other 3D printers in its price range.

Ease of Use

The Bambu Labs P1P is very easy to use. It comes with a user-friendly touchscreen interface that makes it easy to control the printer and monitor your prints. The printer also comes with a number of features that make it easy to get started with 3D printing, such as auto bed leveling and filament detection.

Community

The Bambu Labs P1P has a large and active community of users and developers. This community is constantly developing new features and plugins for the printer. The community is also very helpful and supportive, so you can always get help if you need it.

Pros and Cons

Pros:

  • Large build volume
  • Fast print speeds
  • Direct drive extruder
  • Auto bed leveling
  • Wi-Fi connectivity
  • Built-in camera
  • Filament sensor
  • Power loss recovery system
  • Touchscreen interface
  • High-quality prints
  • Large community of users and developers

Cons:

  • Expensive
  • No enclosure

Comparison to the Creality K1

The Bambu Labs P1P is very similar to the Creality K1 in terms of price and features. However, there are a few key differences between the two printers.

The Bambu Labs P1P has a larger build volume, faster print speeds, and a direct drive extruder. It also has a number of additional features that are not found on the Creality K1, such as a filament sensor, a power loss recovery system, and a touchscreen interface.

However, the Creality K1 is more affordable and comes with an enclosure.

 Feature Bambu Labs P1P Creality K1
Price $699 $599
Build Volume 256 x 256 x 256 mm 220 x 220 x 250 mm
Print Speed 500mm/s 600mm/s
Extruder Direct Drive Bowden
Enclosure No Yes
Auto Bed Level Yes Yes
Wi-Fi Connectivity Yes Yes
Built in Camera Yes No
Filament Sensor Yes No
Power Loss Recovery System Yes No
Touch Screen Interface Yea No

 

As you can see, the Bambu Labs P1P is more expensive than the Creality K1, but it also has a number of additional features, such as a larger build volume, faster print speeds, a direct drive extruder, a filament sensor, a power loss recovery system, and a touchscreen interface.

The Creality K1 is more affordable than the P1P, and it comes with an enclosure, which can be helpful for printing materials that require a stable temperature, such as ABS and ASA.

Ultimately, the best 3D printer for you will depend on your individual needs and budget. If you are looking for a high-quality 3D printer with a lot of features, then the Bambu Labs P1P is a great option. If you are on a tighter budget, then the Creality K1 is also a good option.  Either one of these printers will be capable of producing professional quality custom photo lithophanes.

 

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.